Specifications and technical data
Honda XL 700 V Transalp, 2009, 60 PS, 44 kw
Go to the store - view our offer for
spare parts for Honda XL 700 V Transalp, 2009, 60 PS, 44 kw
Year of manufacture
2009
No. of cylinders
2
Cylinder capacity
700 cc
Power
60 PS, 44 kw
Specifications and technical data
Honda XL 700 V Transalp, 2009, 60 PS, 44 kw
Manufacturer
HONDA MOTORCYCLES XL700V /-Transalp (RD13,RD15) XL700V
Model
Model variant
XL700V
Engine Code
RD13E
Chassis Number
Litres
680
Tuning
Tuning description
Production start year
2007
Production end year
2009
Fuel
Performance
44kW
DIN HP
Revolutions per minute
Engine
Engine speed at maximum power
7750 Revolutions per minute
Number of cylinders
2
Engine
Firing order
1 - 2
Throttle grip free play
2.0 - 4.0 Millimetre
Valve clearance
Cold engine
Inlet
0.13 - 0.17 Millimetre
Exhaust
0.18 - 0.22 Millimetre
Idle speed
1100 - 1300 Revolutions per minute
Spark plugs (make and type)
NGK CPR8EA-9
Spark plugs (make and type)
DENSO U24EPR9
Spark plug gap
0.8 - 0.9 Millimetre
Number of spark plugs
2
Compression pressure
Normal pressure
(At 400 rpm)
(At 400 rpm)
12.75 - 14.71 (bar)
Oil pressure
(at 100 °C)
(at 100 °C)
2.94/6000
Engine
Cap pressure
1.08 - 1.37 (bar)
Thermostat opening temperature
80 - 84 (°C)
Thermostat fully open
95
Electrical system
Battery type
YTZ14S
Battery capacity
11.2 (Ah)
Battery voltage
12 (V)
Battery location
Front disc brakes
Disc thickness, front
3.8 - 4.2 Millimetre
Disc thickness, front, minimum
3.5 Millimetre
Disc run-out, maximum (front)
0.3 Millimetre
Rear disc brakes
Disc thickness, rear
5.8 - 6.2 Millimetre
Disc thickness, rear, minimum
5.0 Millimetre
Disc run-out, maximum (rear)
0.3
Wheels and tyres
Tyre size and pressure
Front tyre size
100/90-19M/C 57H
Front tyre pressure
2.0 (bar)
Rear tyre size
130/80R-17M/C 65H
Rear tyre pressure
(Rider only)
(Rider only)
2.0 (bar)
Rear tyre pressure
(Rider and passenger)
(Rider and passenger)
2.8 (bar)
Speed index, minimum
(Based on the maximum speed as listed in the European Type Approval data sheets)
(Based on the maximum speed as listed in the European Type Approval data sheets)
S
Engine
Engine sump, including filter
Plug location
(Drain plug)
(Drain plug)
Plug location
(Filler plug)
(Filler plug)
Oil filter location
Initial filling
2.9 Litre
Refilling
2.3 Litre
Cooling system
3.0 Litre
Coolant drain plug location
Suspension
Front fork
Left fork leg
0.6 Litre
Right fork leg
0.6 Litre
Front fork
Left fork leg
104 Millimetre
Right fork leg
104 Millimetre
Final drive
Final drive chain (make and type)
REG525ZRHB
Final drive chain free play
35 - 45 Millimetre
Number of final drive chain links
118
Number of final drive front sprocket teeth
15
Number of final drive rear sprocket teeth
47
Clutch system
Clutch plate thickness
(A)
(A)
2.6 - 2.8 Millimetre
Clutch plate thickness
(B)
(B)
2.9 - 3.1 Millimetre
Clutch plate thickness
(C)
(C)
2.6 - 2.8 Millimetre
Clutch plate thickness, minimum
(A)
(A)
2.3 Millimetre
Clutch plate thickness, minimum
(B)
(B)
2.6 Millimetre
Clutch plate thickness, minimum
(C)
(C)
2.3 Millimetre
Clutch spring length
43.2 Millimetre
Clutch spring length, minimum
41.7 Millimetre
Clutch lever free play
10 - 20 Millimetre
Engine
Note: Always renew stretch bolts and self-locking nuts
Cylinder head (nuts)
(Threads and contact surface lightly oiled)
(Threads and contact surface lightly oiled)
40 (Nm)
Cylinder head (bolts)
(Threads and contact surface lightly oiled)
(Threads and contact surface lightly oiled)
23 (Nm)
Valve cover
10 (Nm)
Crankcase left section
23 (Nm)
Crankcase right section
23 (Nm)
Engine oil drain plug
30 (Nm)
Spark plugs
16 (Nm)
Oil filter
(Oiled thread condition)
(Oiled thread condition)
26 (Nm)
Injector
5.4 (Nm)
Oxygen sensor
18 (Nm)
Starter motor
4.9 (Nm)
Camshaft bearing cover
(Threads and contact surface lightly oiled)
(Threads and contact surface lightly oiled)
23 (Nm)
Camshaft gearwheel
(Apply thread-locking compound)
(Apply thread-locking compound)
23 (Nm)
Timing chain tensioner
10 (Nm)
Flywheel
(Threads and contact surface lightly oiled)
(Threads and contact surface lightly oiled)
157 (Nm)
Left-hand thread
Coolant pump housing
13 (Nm)
Fuel pump
12 (Nm)
Fuel tank
26.4 (Nm)
Thermostat housing
10 (Nm)
Oil pump
13 (Nm)
Oil pump gearwheel
(Apply thread-locking compound)
(Apply thread-locking compound)
15 (Nm)
Front disc brakes
Brake master cylinder clamp
(Tighten the upper bolt first; tighten the lower bolt)
(Tighten the upper bolt first; tighten the lower bolt)
12 (Nm)
Front brake caliper guide pin
(Apply thread-locking compound)
(Apply thread-locking compound)
22 (Nm)
Front brake caliper
(Renew the bolts)
(Renew the bolts)
30 (Nm)
Brake hose to caliper
(Renew the sealing washers)
(Renew the sealing washers)
34 (Nm)
Front brake disc
(Tighten the bolts in several stages, in a criss-cross pattern)
(Tighten the bolts in several stages, in a criss-cross pattern)
42 (Nm)
Renew the bolts
Brake pad retaining pin
18 (Nm)
Rear disc brakes
Rear brake caliper guide pin
27 (Nm)
Rear brake caliper carrier
(Renew the bolts)
(Renew the bolts)
22 (Nm)
Brake hose to caliper
(Renew the sealing washers)
(Renew the sealing washers)
34 (Nm)
Rear brake disc
(Tighten the bolts in several stages, in a criss-cross pattern)
(Tighten the bolts in several stages, in a criss-cross pattern)
42 (Nm)
Renew the bolts
Brake pad retaining pin
18 (Nm)
Clutch system
Clutch
(Renew the nut)
(Renew the nut)
128 (Nm)
Threads and contact surface lightly oiled
Clutch spring bolts
(Tighten the bolts in several stages, in a criss-cross pattern)
(Tighten the bolts in several stages, in a criss-cross pattern)
12 (Nm)
Final drive
Final drive front sprocket
10 (Nm)
Final drive rear sprocket
(Threads lightly oiled)
(Threads lightly oiled)
45 (Nm)
Suspension
Note: Always renew stretch bolts and self-locking nuts
Front wheel axle
64 (Nm)
Front wheel axle clamp
12 (Nm)
Rear wheel axle nut
88 (Nm)
Front fork cap
22 (Nm)
Wheel spokes
3.7
General
Motorcycle weight (wet)
(Without ABS)
(Without ABS)
214 Kilogram
Motorcycle weight (wet)
(With ABS)
(With ABS)
219
General
Headlight
Main beam
(H7)
(H7)
55 Watt
Dipped beam
(H7)
(H7)
55
Engine oil
API SG + JASO MA SAE 10W-30
Brake fluid
DOT 4
Chain lubricant
Chain Spray
Fork oil
Fork Oil SS-47 SAE 10W
Front fork
Left fork leg
0.6 Litre
Right fork leg
0.6 Litre
Front fork
Left fork leg
104 Millimetre
Right fork leg
104